Feeling virtuous after dropping a Subaru-full of styrofoam packing and cardboard at recycling center, regard parts list. All present and accounted for.
Hmm, two different lengths of bolts. Odd. Shrug and rely on vast experience assembling cheap furniture ordered online.
Allen wrenches. Smile, contemplating adding six more, all the same size, to collection, as thoughtful manufacturer includes one for every chair, even when chairs come boxed in sets of two.
Hmm, diagrammatic instructions. Yeah, yeah, bolt, spring washer, flat washer. Got it.
Attach seat frame to chair back with bolts.
Seems tight. Shouldn’t be so hard to screw in, with handy Allen wrench.
Take firmer grip on seat frame.
Feel bolts coming through the other side.
Recall two sizes of bolts.
Commence swearing. Those bastards! They didn’t say which bolts go where!
Uh, no, wait.
Accept failure to sufficiently review diagrammatic instructions. Realize used bolt 4’s where bolt 3’s were supposed to go.
Remove too-long bolts.
Examine seat frame back, now exuding small, but potentially injurious, spiky shards of wood-that-was-forced-out-with-too-long-bolts. Whack with rubber handle of screwdriver.
Recall existence of wood glue, supplied.
Apply wood glue, replace spiky pieces of seat frame back damaged by too-long bolts. Whack with screwdriver again.
That’ll have to do, for now.
Use shorter bolts to attach seat frame. Realize longer bolts go in corners of same.
Proceed with assembly.
Chair legs, on.
Now side stretchers.
Those bastards! Holes facing wrong direction! Can’t insert side stretcher!
In view of short-bolt-long-bolt mishap, consider possibility of erroneous chair leg installation.
Remove chair leg bolts.
Observe side-stretcher holes now in correct orientation.
Well, it was sorta their fault! They put “R” for right and “L” for left – was it so wrong to assume that this meant right and left from the chair’s point of view?
Magnanimously accept this as a learning experience. Anticipate smooth assembly of five other chairs.
Dollop of glue, side stretcher inserted, requiring only mild force. Secure with screws.
Repeat dollop of glue on other side
Those bastards! They cut the side stretcher too long! No way can it be forced into that now-correctly-oriented hole!
Consider that tightening screws on other side before inserting both side stretchers restricted ability to force remaining side stretcher into holes.
Smile indulgently, appreciating ability to observe, analyze and solve side stretcher problem. Force in side stretcher.
Tighten, both sides.
On to the chair seat.
Hmm, no pre-drilled holes.
Smugly select correct wood screws, and marvel at softness of chair seat wood. Screws go in easily, even with small, mildly arthritic hands.
Oh, wait. Shouldn’t the seat be flush against the back?
Ah. Notice chair-back shaped notches.
Remove wood screws.
Re-orient seat to fit back into very obvious notches.
Acknowledge failure of attention to detail.
Smile proudly at zen-like attitude of calm self-acceptance.
Tighten wood screws, satisfied that no one will notice extra holes in underside of chair seat.
Now, voila. Chair.
Check glue on damaged part of back of seat frame.
Eureka. Idea. Genius, actually.
Where’s that black electrical tape?
Not in the storage box marked, “tape?”
Obtain black electrical tape at grocery store, along with lunch for Angelic Daughter, and a bunch of frozen dinners just because of coupon. Smile, knowing frozen dinners will come in handy sometime between Monday night and never. Smart shopping.
Eat leftovers while Angelic Daughter eats healthy salad selected from choices offered of 1) healthy salad from grocery store or 3) healthy salad and cup of soup from grocery store (because, electrical tape).
Lunch consumed, experience flash of inspiration – take before and after pictures of ingenious black electrical tape self-help remedy (a/k/a patchy fix for lack of attention to detail that caused damage to new chair) for blog post!
“Before” picture taken. Apply black electrical tape.
Realize can’t tear this kind of tape. Need scissors. But box cutter within reach. That’ll do.
Cut tape with “safety” box cutter, leaving lumpy ball of tape all stuck to itself.
Retrieve scissors from kitchen. Trim tape.
Admire results. No one will notice while also not noticing extra screw holes on bottom of seat. Take “after picture.”
Test chair. Sturdy. Reasonably comfortable. Looks great. Smile with satisfaction at prescient design sense deployed via cheap furniture purchased online.
Elapsed time of first chair assembly (before electrical tape lunch excursion): one hour, forty- five minutes.
Elapsed time of second chair assembly: ten minutes.
Indulge in a moment of smug self-satisfaction at ability to learn from mistakes.
And to disguise them with black electrical tape.
Flagrantly avoiding pending-interview-induced wardrobe-crisis (those bastards! Whaddya mean no in store pick-up available today? AUGH!), I remain