How Not To Assemble A Chair

If you can cover it up with black electrical tape, it’s not a mistake. Right?

Feeling virtuous after dropping a Subaru-full of styrofoam packing and cardboard at recycling center, regard parts list. All present and accounted for.

Hmm, two different lengths of bolts. Odd. Shrug and rely on vast experience assembling cheap furniture ordered online.

Allen wrenches. Smile, contemplating adding six more, all the same size, to collection, as thoughtful manufacturer includes one for every chair, even when chairs come boxed in sets of two.

Hmm, diagrammatic instructions. Yeah, yeah, bolt, spring washer, flat washer. Got it.

Attach seat frame to chair back with bolts.

Seems tight. Shouldn’t be so hard to screw in, with handy Allen wrench.

Take firmer grip on seat frame.

Feel bolts coming through the other side.

Recall two sizes of bolts.

Commence swearing. Those bastards! They didn’t say which bolts go where!

Uh, no, wait.

They did.

Accept failure to sufficiently review diagrammatic instructions. Realize used bolt 4’s where bolt 3’s were supposed to go.

Remove too-long bolts.

Examine seat frame back, now exuding small, but potentially injurious, spiky shards of wood-that-was-forced-out-with-too-long-bolts. Whack with rubber handle of screwdriver.

Recall existence of wood glue, supplied.

Apply wood glue, replace spiky pieces of seat frame back damaged by too-long bolts.  Whack with screwdriver again.

Sigh.

That’ll have to do, for now.

Use shorter bolts to attach seat frame. Realize longer bolts go in corners of same.

Done.

Proceed with assembly.

Chair legs, on.

Now side stretchers.

Wait, wha?

Those bastards! Holes facing wrong direction! Can’t insert side stretcher!

Oh, wait.

In view of short-bolt-long-bolt mishap, consider possibility of erroneous chair leg installation.

Remove chair leg bolts.

Switch sides.

Observe side-stretcher holes now in correct orientation.

Well, it was sorta their fault! They put “R” for right and “L” for left – was it so wrong to assume that this meant right and left from the chair’s point of view?

Breathe.

Magnanimously accept this as a learning experience. Anticipate smooth assembly of five other chairs.

Proceed.

Dollop of glue, side stretcher inserted, requiring only mild force. Secure with screws.

Repeat dollop of glue on other side

Wait, wha?

Those bastards! They cut the side stretcher too long! No way can it be forced into that now-correctly-oriented hole!

Oh, wait.

Consider that tightening screws on other side before inserting both side stretchers restricted ability to force remaining side stretcher into holes.

Loosen screws.

Smile indulgently, appreciating ability to observe, analyze and solve side stretcher problem. Force in side stretcher.

Tighten, both sides.

On to the chair seat.

Hmm, no pre-drilled holes.

Whatever.

Smugly select correct wood screws, and marvel at softness of chair seat wood. Screws go in easily, even with small, mildly arthritic hands.

Voila! Chair!

Oh, wait.  Shouldn’t the seat be flush against the back?

Ah. Notice chair-back shaped notches.

Sigh.

Remove wood screws.

Re-orient seat to fit back into very obvious notches.

Acknowledge failure of attention to detail.

Smile proudly at zen-like attitude of calm self-acceptance.

Tighten wood screws, satisfied that no one will notice extra holes in underside of chair seat.

Now, voila. Chair.

Check glue on damaged part of back of seat frame.

Dry enough.

Eureka. Idea. Genius, actually.

Where’s that black electrical tape?

Not in the storage box marked, “tape?”

Sigh.

Shopping excursion.

Obtain black electrical tape at grocery store, along with lunch for Angelic Daughter, and a bunch of frozen dinners just because of coupon. Smile, knowing frozen dinners will come in handy sometime between Monday night and never. Smart shopping.

Eat leftovers while Angelic Daughter eats healthy salad selected from choices offered of 1) healthy salad from grocery store or 3) healthy salad and cup of soup from grocery store (because, electrical tape).

Lunch consumed, experience flash of inspiration – take before and after pictures of ingenious black electrical tape self-help remedy (a/k/a patchy fix for lack of attention to detail that caused damage to new chair) for blog post!

“Before” picture taken. Apply black electrical tape.

Realize can’t tear this kind of tape. Need scissors. But box cutter within reach. That’ll do.

Cut tape with “safety” box cutter, leaving lumpy ball of tape all stuck to itself.

Sigh.

Retrieve scissors from kitchen. Trim tape.

IMG_20190504_144038032.jpg

Admire results. No one will notice while also not noticing extra screw holes on bottom of  seat. Take “after picture.”

Test chair.  Sturdy. Reasonably comfortable. Looks great. Smile with satisfaction at prescient design sense deployed via cheap furniture purchased online.

Elapsed time of first chair assembly (before electrical tape lunch excursion): one hour, forty- five minutes.

Elapsed time of second chair assembly: ten minutes.

Indulge in a moment of smug self-satisfaction at ability to learn from mistakes.

And to disguise them with black electrical tape.

Flagrantly avoiding pending-interview-induced wardrobe-crisis (those bastards! Whaddya mean no in store pick-up available today? AUGH!), I remain

Your confident-four-more-chairs-can-now-be-assembled-in-less-than-an-hour-and-sale-rack-scavenging-skills-will-resolve-wardrobe-crisis-in-less-than-two-days,

Ridiculouswoman

Author: Ridiculouswoman

When my husband entered hospice I finally learned that love, gratitude and laughter are what matter. All the rest is noise. From now on, I'm wearing my heart on my sleeve.

4 thoughts on “How Not To Assemble A Chair”

  1. I laughed particularly hard at this one- last week I received an online order of a small new dining table and two chairs. My older daughter is a whiz at understanding and applying drawn directions whereas I am not. But she is at the end of her semester as a college professor and not feeling well. “I will spare her even thinking about my issues and I will do this myself”. Well, after an hour and a half I proudly got 1/4 of one chair done. Only I already knew something was wrong but wasn’t sure what. I was saved from hurting my body more than I already had, leaning over on the floor peering at incomprehensible drawings and twisting this way and that to use the darn Allen wrench…Well, due to one friend seeing my furniture arrive and who mentioned it to another 85 year old friend who works in the wood shop here at Kendal, I was rescued when he showed up, electric Phillips screwdriver in hand, ready for the other screws he knew this company always included. I had paid him to build me some shelves and a small kitchen counter/shelf unit for my teeny kitchenette last month. He looked at me and said, “Hey we’re friends now, no money, please. 2 1/2 hours later, I had two chairs and my table. I know my brain doesn’t work like his or my daughter’s- they see the world differently than I do. Again you are my heroine here, doing it on your own, and let’s hear it for electrical tape and duct tape and anything else we need to muddle through our lives with and without directions!

    Like

    1. Hoorah for you, Judi, maker of friends and acceptor of help! Glad you spared yourself most of the pain! Having now completed two more chairs, expect an addendum when the fifth and sixth are done! Suffice it to say, I “learned” even more!

      ♥️😉

      Like

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.